Weider Gym 4000 Uk Manual - Page 17
Weight Resistance Chart
View all Weider Gym 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ADJUSTING AND REMOVING THE LEG PRESS PLATE AND ADJUSTMENT TUBE To adjust the position of the Leg Press Plate (78), remove the "L"-Pin (40) from the Press Adjustment Tube (79) and the Rocker Arm (32). Align a different set of holes in the Press Adjustment Tube with the set of holes in the Rocker Arm. Re-insert the "L"-Pin. For some exercises, the Press Adjustment Tube (79) must be removed. Remove the "L"-Pin (40). Lift the Press Adjustment Tube off the bracket on the Rocker Arm (32). LOCKING THE LEG LEVER When the low pulley station is in use, the Leg Lever (29) must be locked in place. Insert the "L"-Pin (40) through the hole in the Leg Lever and the hole in the Rocker Arm (32). 32 79 78 40 32 40 29 Weight Resistance Chart This chart shows the approximate weight resistance at each station. "Top" refers to the 6.5 lb. top weight. The other numbers refer to the 12.5 lb. weight plates. Weight resistance shown for the butterfly arm station is for each butterfly arm. Note: The actual resistance at each weight station may vary due to differences in individual weight plates, as well as friction between the cables, pulleys, and weight guides. WEIGHT PLATES PRESS ARM (lbs.) BUTTERFLY ARM (lbs.) LEG LEVER (lbs.) HIGH PULLEY (lbs.) LOW PULLEY (lbs.) LEG PRESS (lbs.) Top 13 1 36 2 57 3 73 4 99 5 118 6 132 7 151 8 165 9 27 23 52 32 81 46 115 58 142 74 171 88 201 112 217 131 264 17 14 32 30 30 52 65 44 93 97 58 121 130 69 144 170 88 178 215 101 217 247 114 230 319 131 262 347