Weider Pro 120 Bench Uk Manual - Page 7
Slide the Foam Pads 6 onto the Pad Tubes
 |
View all Weider Pro 120 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Press two 50mm Round Outer Caps (9) onto the Pivot Leg (2). Align the indicated hole in the Pivot Leg (2) with the middle adjustment hole in the Frame (1). Attach the Pivot Leg (2) to the Frame (1) with the M10 x 70mm Bolt (14) and the M10 Locknut (13). Secure the Pivot Leg (2) by inserting the L-pin (15) through the indicated hole in the Pivot Leg and the corresponding hole in the Frame (1). 2 9 1 Align these holes 13 15 2 14 9 3. Press the 3/4" Round Inner Caps (7) into the ends of the Pad Tubes (10). Insert the Pad Tubes (10) into the Adjustment Leg (3). Slide the Foam Pads (6) onto the Pad Tubes (10). 3 6 7 10 6 7 3 10 7 6 7 6 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
7
2.
Press two 50mm Round Outer Caps (9) onto
the Pivot Leg (2).
Align the indicated hole in the Pivot Leg (2) with
the middle adjustment hole in the Frame (1).
Attach the Pivot Leg (2) to the Frame (1) with
the M10 x 70mm Bolt (14) and the M10 Locknut
(13).
Secure the Pivot Leg (2) by inserting the L-pin
(15) through the indicated hole in the Pivot Leg
and the corresponding hole in the Frame (1).
3.
Press the 3/4" Round Inner Caps (7) into the
ends of the Pad Tubes (10).
Insert the Pad Tubes (10) into the Adjustment
Leg (3).
Slide the Foam Pads (6) onto the Pad Tubes
(10).
2
3
1
13
2
9
9
14
Align these
holes
6
10
6
3
7
7
6
10
6
7
7
15