Weider Pro 202 Bench English Manual - Page 6

Assembly - press

Get Weider Pro 202 Bench PDF manuals and user guides View all Weider Pro 202 Bench manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

ASSEMBLY Make Things Easier for Yourself This manual is designed to ensure that the weight bench can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two people. • For help identifying small parts, use the PART IDENTIFICATION CHART on page 5. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. The following tools (not included) are required for assembly: • Two adjustable wrenches • One rubber mallet • One standard screwdriver • One Phillips screwdriver • Lubricant, such as grease or petroleum jelly, and soapy water. Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. Before assembling the weight bench, make sure that you understand the information in the box above. Press a 45mm Square Inner Cap (14) into the top of the Front Leg (2). Press two 50mm Round Outer Caps (12) onto the ends of the Black Stabilizer (29). Attach the Black Stabilizer (29) to the Front Leg (2) with two M10 x 63mm Carriage Bolts (18) and two M10 Nylon Locknuts (19). Be sure the indents in the Stabilizer and the name decal on the Front Leg are in the positions shown. Do not tighten the Locknuts yet. 2. Press four 50mm Square Inner Caps (13) into the tubes on the Frame (1). Make sure the slots on the Caps are vertical to accommodate the Screws (not shown) that will attach the Seat (not shown) to the Frame. Attach the Frame (1) to the Front Leg (2) with two M10 x 63mm Bolts (30), two M10 Large Washers (27), and two M10 Nylon Locknuts (19). Do not tighten the Locknuts yet. 1 14 Name 2 Decal 19 12 19 29 12 2 1 Slot Slot 19 13 Indents 18 13 19 27 30 20 2 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
6
Before beginning assembly, carefully read the
following information and instructions:
•
Assembly requires two people.
•
For help identifying small parts, use the
P
ART
IDENTIFICA
TION CHART
on page 5.
•
Tighten all parts as you assemble them, unless
instructed to do otherwise.
•
As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
•
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
The following tools (not included) are required
for assembly:
•
Two adjustable wrenches
•
One rubber mallet
•
One standard screwdriver
•
One Phillips screwdriver
•
Lubricant, such as grease or petroleum jelly,
and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
This manual is designed to ensure that the
weight bench can be assembled successfully
by anyone. Most people find that by setting
aside plenty of time, assembly will go smoothly.
ASSEMBLY
1.
Press a 45mm Square Inner Cap (14) into the top
of the Front Leg (2). Press two 50mm Round Outer
Caps (12) onto the ends of the Black Stabilizer
(29).
Attach the Black Stabilizer (29) to the Front Leg (2)
with two M10 x 63mm Carriage Bolts (18) and two
M10 Nylon Locknuts (19).
Be sure the indents in
the Stabilizer and the name decal on the Front
Leg are in the positions shown. Do not tighten
the Locknuts yet.
2.
Press four 50mm Square Inner Caps (13) into the
tubes on the Frame (1).
Make sure the slots on
the Caps are vertical to accommodate the
Screws (not shown) that will attach the Seat
(not shown) to the Frame.
Attach the Frame (1) to the Front Leg (2) with two
M10 x 63mm Bolts (30), two M10 Large Washers
(27), and two M10 Nylon Locknuts (19).
Do not
tighten the Locknuts yet.
1
2
2
12
12
13
1
Slot
Slot
19
30
13
2
27
20
19
19
19
14
18
Name
Decal
Indents
29
Before assembling the weight bench, make
sure that you understand the information in
the box above.