Weider Pro 230 Weight Bench English Manual - Page 6

ASSEMBLY Make Assembly Easier This manual is designed to ensure that the weight bench can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two persons. • Because of its weight and size, the weight bench should be assembled in the location where it will be used. Make sure that there is enough clearance to walk around the weight bench as you assemble it. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. • For help identifying small parts, see the PART IDENTIFICATION CHART on page 5. The included grease and the following tools (not included) may be required for assembly: • Two adjustable wrenches • One rubber mallet • One standard screwdriver • One Phillips screwdriver Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. To make assembly easier, make sure that 1 you understand the information in the box above. Locate the Stabilizer (4) without the warning decal. Attach the Stabilizer to the Front Leg (2) with two M10 x 63mm Carriage Bolts (18) and two M10 Nylon Locknuts (19). Do not tighten the Nylon Locknuts yet. 2 19 4 2. Attach the Frame (1) to the Front Leg (2) with two M10 x 63mm Bolts (16), two M10 Large Washers (27), and two M10 Nylon Locknuts (19). Do not tighten the Nylon Locknuts yet. 2 1 19 19 18 27 16 27 2 6