Weider Pro 330 Instruction Manual - Page 10

Nylon Locknut; the Right Fly Arm must pivot

Get Weider Pro 330 PDF manuals and user guides View all Weider Pro 330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

11. Attach the Weight Tube (19) to the Leg Lever 11 (18) with an M8 x 58mm Bolt (46), two M8 Washers (50), a 12mm x 10mm Spacer (61), and an M8 Nylon Locknut (49). Press the 25mm Round Outer Cap (62) onto the end of the Weight Tube (19). 12. Apply grease to the barrel of an M10 x 57mm 12 Bolt Set (55). Attach the Leg Lever (18) to the Front Leg (12) with the Bolt Set. Make sure the barrel of the Bolt Set passes completely through the bracket. Do not overtighten the Bolt Set; the Leg Lever must pivot easily. 61 49 50 19 18 62 50 46 Grease 55 18 55 Bracket 12 13. Locate the Pad Tube (24) that has a 19mm Round Inner Cap (25) in each end. Insert the Pad Tube into either hole in the Front Leg (12). Slide two Foam Pads (23) onto the Pad Tube. Insert a Pad Tube (24) into one of the holes in the Leg Lever (18). Slide two Foam Pads (23) onto the Pad Tube, and press a Pad Cap (68) into the end of each Foam Pad. Repeat with the other Pad Tube (24). 13 23 18 24 68 23 25 25 12 24 23 24 68 10 14. Attach the Right Fly Arm (52) to the Right Upright Base (4) with an M10 x 130mm Bolt (65), two 10mm Bushings (38), and an M10 Nylon Locknut (58). Do not overtighten the Nylon Locknut; the Right Fly Arm must pivot easily. 14 60 33 58 Attach the Right Fly Handle (33) to the Right Fly Arm (52) with an M10 x 58mm Bolt (60) and an M10 Nylon Locknut (58). Do not overtighten the Nylon Locknut; the Right Fly Handle must pivot easily. Repeat this step for the other side of the weight bench. 52 38 65 4 38 58 15. Insert a Weight Rest (39) into one of the holes in the Left Upright (31) and engage the locking bar around the Left Upright. Repeat this step with the other Weight Rest (39) and the Right Upright (28). 15 39 28 39 31 Locking Bar 16. Attach the Curl Pad (20) to the Curl Post (13) with two M6 x 16mm Screws (41). 16 17. Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTMENTS, starting on the next page. 20 13 41 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
11
16
16. Attach the Curl Pad (20) to the Curl Post (13)
with two M6 x 16mm Screws (41).
17.
Make sure that all parts are properly tight-
ened before you use the weight bench. The
use of all remaining parts will be explained
in ADJUSTMENTS, starting on the next
page.
20
13
41
14
15
52
60
58
33
38
39
31
Locking
Bar
4
65
38
58
39
28
15. Insert a Weight Rest (39) into one of the holes
in the Left Upright (31) and engage the locking
bar around the Left Upright.
Repeat this step with the other Weight Rest
(39) and the Right Upright (28).
14. Attach the Right Fly Arm (52) to the Right
Upright Base (4) with an M10 x 130mm Bolt
(65), two 10mm Bushings (38), and an M10
Nylon Locknut (58).
Do not overtighten the
Nylon Locknut; the Right Fly Arm must pivot
easily.
Attach the Right Fly Handle (33) to the Right
Fly Arm (52) with an M10 x 58mm Bolt (60) and
an M10 Nylon Locknut (58).
Do not overtight-
en the Nylon Locknut; the Right Fly Handle
must pivot easily.
Repeat this step for the other side of the
weight bench.
10
11.
Attach the Weight Tube (19) to the Leg Lever
(18) with an M8 x 58mm Bolt (46), two M8
Washers (50), a 12mm x 10mm Spacer (61),
and an M8 Nylon Locknut (49).
Press the 25mm Round Outer Cap (62) onto
the end of the Weight Tube (19).
12. Apply grease to the barrel of an M10 x 57mm
Bolt Set (55). Attach the Leg Lever (18) to the
Front Leg (12) with the Bolt Set.
Make sure the
barrel of the Bolt Set passes completely
through the bracket. Do not overtighten the
Bolt Set; the Leg Lever must pivot easily.
11
23
23
18
18
12
24
25
25
12
24
24
68
12
23
68
50
19
18
62
46
61
50
49
55
55
Grease
Bracket
13. Locate the Pad Tube (24) that has a 19mm
Round Inner Cap (25) in each end. Insert the
Pad Tube into either hole in the Front Leg (12).
Slide two Foam Pads (23) onto the Pad Tube.
Insert a Pad Tube (24) into one of the holes in
the Leg Lever (18). Slide two Foam Pads (23)
onto the Pad Tube, and press a Pad Cap (68)
into the end of each Foam Pad.
Repeat with
the other Pad Tube (24).
13