Weider Pro 330 Instruction Manual - Page 7
and the Right Rear Support 7.
View all Weider Pro 330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
STORING THE WEIGHT BENCH Set the Backrest (22) and the Adjustment Tube (9) to the position shown (see ADJUSTING THE BACKREST on page 12). Remove the indicated Curl Knob (56) and lift the Frame (8) to the vertical position. Then, insert the Curl Knob in the location shown. 22 9 8 56 14 2. Attach the Crossbar (5) to the Left Upright Base 2 (3) with two M10 x 93mm Bolts (66), two M10 Washers (43), and two M10 Nylon Locknuts (58). Do not tighten the Nylon Locknuts yet. 4 Repeat this step with the Right Upright Base (4). 3. Slide the Left Upright (31) onto the Left Upright 3 Base (3). Attach the Left Rear Support (6) to the Left Stabilizer (1) with the indicated M10 x 50mm Carriage Bolts (67) and two M10 Nylon Locknuts (58). Do not tighten the Nylon Locknuts yet. Attach the Left Rear Support (6) to the Left Upright (31) and the Left Upright Base (3) with two M10 x 58mm Bolts (60), the Left Upright Plate (15), and two M10 Nylon Locknuts (58). Finish attaching the Rear Support with an M10 x 93mm Bolt (66), two M10 Washers (43), and an M10 Nylon Locknut (58). Do not tighten the Nylon Locknuts yet. Repeat this step with the Right Upright (28) and the Right Rear Support (7). 66 5 66 3 43 43 58 28 31 7 66 43 58 6 60 15 43 58 58 58 3 1 67 4. Attach the Front Leg (12) to the Front Stabilizer 4 (11) with two M10 x 93mm Bolts (66) and two M10 Nylon Locknuts (58). Do not tighten the Nylon Locknuts yet. 12 58 66 11 7