Weider Pro 5500 User Manual - Page 14

tighten the Nylon Locknut; the Press Arms

Get Weider Pro 5500 PDF manuals and user guides View all Weider Pro 5500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

15. Orient a Press Arm Handle (17) with the 90° bend at the top as shown in the inset drawing. Attach a 15 Press Arm Handle (17) to the Right Press Arm (16) with two M10 x 65mm Button Bolts (106), four M10 Washers (80), four 11mm Spacers (99), and two M10 Nylon Locknuts (77). Repeat this step for the Left Press Arm (not shown). 80 99 99 80 99 106 80 16 90° Bend 77 80 90° 99 Bend 17 16. Attach the Left Press Arm (15) to the Right Press Arm (16) with an M10 x 110mm Bolt (93), an 90mm Spacer (59) and an M10 nylon Locknut (77). Finish attaching the Press Arms with two M10 x 65mm Bolts (85), two M10 Washers (80), and two M10 Nylon Locknuts (77). Do not tighten the Nylon Locknuts yet. 16 16 77 80 77 59 15 93 85 17. Apply grease to an M10 x 110mm Bolt (93). 17 Attach the Left and Right Press Arms (15, 16) to the Base (1) with the Bolt, an 90mm Spacer (59), and an M10 Nylon Locknut (77). Do not over- tighten the Nylon Locknut; the Press Arms (15, 16) must be able to pivot freely. Tighten the Nylon Locknuts (77) used in step 16. 14 16 15 77 Grease 1 59 93

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
14
15. Orient a Press Arm Handle (17) with the 90° bend
at the top as shown in the inset drawing. Attach a
Press Arm Handle (17) to the Right Press Arm
(16) with two M10 x 65mm Button Bolts (106),
four M10 Washers (80), four 11mm Spacers (99),
and two M10 Nylon Locknuts (77).
Repeat this step for the Left Press Arm (not
shown).
16. Attach the Left Press Arm (15) to the Right Press
Arm (16) with an M10 x 110mm Bolt (93), an
90mm Spacer (59) and an M10 nylon Locknut
(77).
Finish attaching the Press Arms with two M10 x
65mm Bolts (85), two M10 Washers (80), and two
M10 Nylon Locknuts (77).
Do not tighten the
Nylon Locknuts yet.
17. Apply grease to an M10 x 110mm Bolt (93).
Attach the Left and Right Press Arms (15, 16) to
the Base (1) with the Bolt, an 90mm Spacer (59),
and an M10 Nylon Locknut (77).
Do not over-
tighten the Nylon Locknut; the Press Arms
(15, 16) must be able to pivot freely.
Tighten the Nylon Locknuts (77) used in
step 16.
16
16
15
77
77
59
93
80
85
17
16
15
77
1
106
16
99
99
99
80
80
77
99
80
80
17
15
90° Bend
90°
Bend
Grease
59
93