Weider Pro 5500 User Manual - Page 15
Cable Assembly
View all Weider Pro 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Cable Assembly 18 18. See the CABLE DIAGRAMS on page 28 to identify the cables as you assemble them. Identify the Butterfly Cable (50). Grease an M8 x 22mm Shoulder Bolt (90). Attach the Cable to the Left Butterfly Bracket (28) with the Shoulder Bolt and an M8 Nylon Locknut (78). Make sure the flat edge of the Cable is against the Butterfly Bracket. Do not overtighten the Shoulder Bolt; the Cable must pivot freely. 90 Grease 50 28 78 19. Wrap the Butterfly Cable (50) over a "V"-pulley (47). Attach the "V"-pulley, a Long Cable Trap (57), an M10 Washer (80), and two Guards (54) to the Upright (2) with an M10 x 60mm Bolt (79) and an M10 Nylon Locknut (77). Flat Edge 19 2 77 54 50 57 54 79 80 47 20. Wrap the Butterfly Cable (50) under a 90mm 20 Pulley (48). Attach the Pulley and two Half Guards (55) to the Double "U"-bracket (61) with an M10 x 45mm Bolt (86) and an M10 Nylon Locknut (77). Make sure the Half Guards are oriented as shown. 48 86 55 50 77 55 61 15