Weider Pro 9350 English Manual - Page 12

24. Press a 1 1/2" Inner Cap (38) into the Seat Frame (32). Attach the two Seat Brackets (39) to the Seat Frame (32) with 1/4" x 2 1/4" Carriage Bolts (40), 1/4" Flat Washers (6) and 1/4" Nylock Nuts (5). Attach the Seat (31) to the Seat Brackets (39) with four 1/4" x 3/4" Screws (7). The narrow end of the Seat must be towards the bracket on the beat Frame. 24 31 Narrow End 40 39 38 p 4 119$7 39 7 6 5 25. Press a 1 1/2" Inner Cap (38) into the Leg Lever (33). Apply grease to a 5/16" x 2 1/4" Bolt (23). Attach the Leg Lever (33) to the Seat Frame (32) with the Bolt and a 5/16" Nylock Nut (4). Do not overtighten the Nylock Nut; the Leg Lever must be able to pivot freely. Insert the 5/16" x 2" Eyebolt (37) through the Leg Lever (33) from the indicated side. Slide a 5/16" Flat Washer (45) onto the Eyebolt and tighten a 5/16" Nylock Nut (4) onto the Eyebolt. 25 . . 4 32 • a Grease 33 . 4 - 0 45 37 38 26. Press 3/4" Inner Caps (36) into the ends of the two Pad Tubes (35). Insert one Pad Tube (35) into the Seat Frame (32) and center it. Slide a Foam Pad (34) onto each end of the Pad Tube. Insert the other Pad Tube into the Leg Lever (33) and slide a Foam Pad onto each end of it. Align the bracket on the Seat Frame (32) with the indicated tube on the Front Upright (19). Insert a 5/16" x 2 3/4" Carraige Bolt (113) through the Seat Frame and the Front Upright. Tighten a 5/16" Knob (11) onto the Bolt. 27. Attach the Military Press Seat (98) to the Seat Post (93) with four 1/4" x 3/4" Screws (7). Insert the Seat Post (93) into the socket on the Base (15). 26 34 11 s. 19 113 34 32 27 98 _ _ .. , 7 6--7 93 ,--. ,---e 15 33 35 0 34 36 12