Weslo 65 Treadmill English Manual - Page 7
Front Endcap Screws 14.
View all Weslo 65 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. With the help of a second person, carefully tip the treadmill onto its right side. Do not fully fold the Frame (58) until the treadmill is completely assembled. Insert the other Extension Leg (89) into the base of the Uprights (84). Hold an Extension Leg Nut (67) in the bottom of the Extension Leg, and thread a 2.25" Extension Leg Bolt (92) with a Star Washer (8) into the top of the Extension Leg. Next, thread a 2.5" Extension Leg Bolt (65) with a Star Washer (8) into the bottom of the Extension Leg. Firmly tighten the Extension Leg Bolts. Slide the other Front Endcap (44) onto the base of the Upright (84). Partially tighten a Front Endcap Screw (14) into the Front Endcap and the base. 3. Attach two Base Pads (82) to the base of the Uprights (84) with two 1" Tek Screws (83). 2 14 44 84 92 8 8 65 67 89 58 3 83 82 84 83 82 4. With the help of a second person, carefully raise the Uprights (84) to a vertical position. Have the second person hold the Handrail (20) near the Uprights (84). Insert the Wire Harness (77) into the hole in the bottom of the Handrail and out of the top as shown. 4 64 8 Next, set the Handrail (20) on the Uprights (84). Do not let the Wire Harness (77) fall into the right Upright. Attach the Handrail (20) with four Handrail Bolts (64) and four Star Washers (8); start all four Handrail Bolts and then firmly tighten them. 84 See steps 1 and 2. Fully tighten the two Front Endcap Screws (14). 7 64 8 20 77