Weslo Cadence 4350 Owners Manual - Page 8
controlled
![]() |
View all Weslo Cadence 4350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
INCLINE ADJUSTMENT To vary the level of exercise intensity, the incline of the treadmill can be changed using the lever on the right side of the console. Do not adjust the incline while you are walking or running on the treadmill. To increase the incline of the treadmill, stand toward the rear of the foot rails and pull back the lever. When the desired incline is reached, release the lever. To decrease the incline, stand toward the front of the foot rails, lean forward if necessary, and pull back the lever until the desired incline is reached. There is an incline indicator located above the incline lever on the console. The indicator measures the incline of the treadmill. Auto Speed Controls Manual Speed Control 1 9 E 2 ® 1 3 0 CO Program "START" Key Incline Bubble Incline Lever Timer Manual Mode Indicator Clip Control Power Switch Safety Card TURNING THE POWER ON AND OFF 1. Stand on the treadmill wiih your feet on the foot rails. 2. Attach the clip on the safety card to the waistband of your clothing. To turn the power on, insert the card into the power switch. The manual mode indicator above the switch will light. IMPORTANT: For your safety, always wear the clip when using the treadmill. If you should slip or fall while exercising, the card will be, disengaged from the switch, instantly turning the power off. 3. To turn the power off, remove the safety card. SPEED ADJUSTMENT The speed of the treadmill can be controlled either manually or using the programmable mode. 8 Note: The manual mode indicator will light when the treadmill is in the manual mode.
![](/manual_guide/products/weslo-cadence-4350-owners-manual-00c49c6/8.png)