Weslo Cadence 50 Ls Uk Manual - Page 5
Assembly, Warning
View all Weslo Cadence 50 Ls manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver and two adjustable spanners . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Nut (2)-4 Screw (90)-6 Handrail Bolt (11)-4 Handrail Washer (39)-4 Base Leg Washer (68)-4 Base Leg Bolt (28)-4 WARNING: Do not plug in the power cord until the treadmill is completely assembled. 1. Note that the Right Handrail and the Console Base (not shown) are connected to the treadmill by a Wire Harness. During assembly steps 1 to 3, be careful not to pull on or damage the Wire Harness. With the help of a second person, carefully lay the treadmill on its side. Position one of the Base Legs (55) on the base of the Upright (37) as shown. Make sure that the Base Leg Pads (31) and the Wheel (34) are in the indicated positions. Attach the Base Leg with two Base Leg Bolts (28), two Base Leg Washers (68), and two Nuts (2). Carefully turn the treadmill onto its other side. Assemble the other Base Leg (55) as described. With the help of a second person, carefully raise the treadmill to the upright position so that both Base Legs (55) are resting flat on the floor. 2. Attach the Storage Latch (38) to the left Upright (37) with two Screws (90). Be careful not to overtighten the Screws. 1 37 2 55 2 38 28 68 31 34 37 90 5