Weslo Cadence 700 English Manual - Page 8
Operation, Adjustment
View all Weslo Cadence 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
OPERATION AND ADJUSTMENT PLUGGING IN THE POWER CORD This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into an appropriate outlet that is properly Installed and grounded in accordance with all local codes and ordinances. A,. DANGER: Improper connection of the equipment-grounding conductor can result in a risk of elec- tric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Drawing 1. A temporary adapter that looks like the adapter illustrated in Drawing 2 may be used to connect this plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (Drawing 1) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to determine if the outlet box cover Is grounded before using an adapter. 1 Grounded Outlet Box 2 0•13 Grounding Plug 0 0 • g Grounding Pin Grounded Outlet Grounded Outlet Box 0 IJ Adapter Grounding Pin 0 IJ Grounding Plug 0 Lug Metal Screw MAINTENANCE-FREE WALKING BELT Your treadmill features a maintenance-free walking belt coated with PERFORMANT LUBETh', a high-performance lubricant. During the first few hours of use, it is normal for a small amount of white powder to appear on the foot rails and the walking platform. The white powder is high-performance lubricant from the walking belt. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will deteriorate the walking belt and cause excessive wear. CUSHION LEVEL ADJUSTMENT For a softer cushion level as you exercise, turn the cushion knob counterclockwise. For a firmer cushion level, turn the knob clockwise. Note: The faster you run on the treadmill, the firmer the cushion level should be. If the cushion level is too soft, the treadmill will bounce excessively. 8 Cushion Knob