Weslo Cadence Ct10 English Manual - Page 12

Trouble, Shooting

Get Weslo Cadence Ct10 PDF manuals and user guides View all Weslo Cadence Ct10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

- 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of in- jury, bend your legs and keep your back straight. ( - 6- TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department tollfree at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a properly grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page 7.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. After the power cord has been plugged in, make sure that the key is fully inserted into the console. (See step 1 on page 9.) c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in. c Tripped Reset 2. SYMPTOM: THE POWER TURNS OFF DURING USE a. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in. b. Make sure that the power cord is plugged in. c. Remove the key from the console. Reinsert the key fully into the console. (See step 1 on page 9.) 12 d. If the treadmill still will not run, please call our Customer Service Department, toll-free.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
-
2.
Hold
the
treadmill
firmly
with
both
hands,
and
lower
the
treadmill
to
the
floor.
To
decrease
the
possibility
of
in-
jury,
bend
your
legs
and
keep
your
back
straight.
(
-
6
-
TROUBLE
-SHOOTING
Most
treadmill
problems
can
be
solved
by
following
the
steps
below.
Find
the
symptom
that
applies,
and
follow
the
steps
listed.
If
further
assistance
is
needed,
please
call
our
Customer
Service
Department
toll
-
free
at
1-800-999-3756,
Monday
through
Friday,
6
a.m.
until
6
p.m.
Mountain
Time
(excluding
holidays).
1.
SYMPTOM:
THE
POWER
DOES
NOT
TURN
ON
a.
Make
sure
that
the
power
cord
is
plugged
into
a
surge
protector,
and
that
the
surge
protector
is
plugged
into
a
properly
grounded
outlet.
(See
HOW
TO
PLUG
IN
THE
POWER
CORD
on
page
7.)
Use
only
a
UL
-listed
surge
protector,
rated
at
15
amps,
with
a
14
-gauge
cord
of
five
feet
or
less
in
length.
b.
After
the
power
cord
has
been
plugged
in,
make
sure
that
the
key
is
fully
inserted
into
the
console.
(See
step
1
on
page
9.)
c.
Check
the
circuit
breaker
located
on
the
treadmill
near
the
power
cord.
If
the
switch
protrudes
as
shown,
the
circuit
breaker
has
tripped.
To
reset
the
circuit
breaker,
wait
for
five
minutes
and
then
press
the
switch
back
in.
2.
SYMPTOM:
THE
POWER
TURNS
OFF
DURING
USE
c
Tripped
Reset
a.
Check
the
circuit
breaker
located
on
the
treadmill
frame
near
the
power
cord
(see
1.
c.
above).
If
the
circuit
breaker
has
tripped,
wait
for
five
minutes
and
then
press
the
switch
back
in.
b.
Make
sure
that
the
power
cord
is
plugged
in.
c.
Remove
the
key
from
the
console.
Reinsert
the
key
fully
into
the
console.
(See
step
1
on
page
9.)
12
d.
If
the
treadmill
still
will
not
run,
please
call
our
Customer
Service
Department,
toll
-free.