Weslo Cadence G 5.9 Treadmill English Manual - Page 8
Console Assembly - parts
View all Weslo Cadence G 5.9 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Attach the console assembly to the Upright (73) and the Handrails (69) with six M4.2 x 19mm 4 Screws (3). Be careful not to pinch the wires. Console Assembly 73 69 3 3 69 3 5. Attach the Latch Housing (72) to the left Upright (73) with two #10 x 1" Tek Screws (83); start 5 both Screws, and then tighten them. 73 72 83 6. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 17 and 18). To protect the floor or carpet, place a mat under the treadmill. 8
8
6.
Make sure that all parts are properly tightened before you use the treadmill.
Keep the included hex keys
in a secure place. One of the hex keys is used to adjust the walking belt (see pages 17 and 18). To protect the
floor or carpet, place a mat under the treadmill.
4.
Attach the console assembly to the Upright (73)
and the Handrails (69) with six M4.2 x 19mm
Screws (3).
Be careful not to pinch the wires.
4
5.
Attach the Latch Housing (72) to the left Upright
(73) with two #10 x 1" Tek Screws (83);
start
both Screws, and then tighten them.
5
3
83
73
72
69
69
3
3
Console Assembly
73