Weslo Cadence Lx45 English Manual - Page 10

How To Fold And Move The Treadmill - walking belt

Page 10 highlights

• DISTANCE/LAPS hour) or an "M" for "Metric" (kilometers per hour) display-This dis- will appear in the DISTANCE/LAPS display. Press play shows the the MODE button twice to change the unit of mea- total distance that surement. Remove and then reinsert the key. you have walked and the number of • CALS./FAT CALS. laps you have completed (one lap equals 1/4 display-This dis- mile). The display will alternate between one num- play shows the ap- ber and the other every seven seconds. An "L" will proximate num- appear in the display when the number of laps is bers of calories shown. and fat calories you have burned (see FAT BURNING on page 14 • TIME display- for an explanation of fat calories). Every seven When the manual seconds, the display will change from one number mode is selected, to the other. An "F" will appear in the display when the elapsed time the number of fat calories is shown. will be shown. 7 When one of the preset programs is selected, the time remaining in When you are finished, remove the key. the program will be displayed. Step onto the foot rails and remove the • SPEED display- key from the con- This display shows sole. Store the key the speed of the in a secure place. In walking belt, in addition, move the miles per hour or on/off switch to the kilometers per "off" position. (See the drawing near the bottom of hour. An MPH or a KPH will appear in the display page 8.) to show which unit of measurement is selected. To change the unit of measurement, hold down the START/PAUSE button while inserting the key into the console. An "E" for "English" (miles per HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. Caution: To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Unplug the power cord. Caution: You must be able to
safely lift 45 pounds (20 kg) in order to raise, lower, or
move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right.
Caution: To decrease the possibility of in-
jury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your legs
rather than your back.
Raise the treadmill about halfway
to the vertical position.
DISTANCE/LAPS
display—This dis-
play shows the
total distance that
you have walked
and the number of
laps you have completed (one lap equals 1/4
mile). The display will alternate between one num-
ber and the other every seven seconds. An “L” will
appear in the display when the number of laps is
shown.
• TIME display—
When the manual
mode is selected,
the elapsed time
will be shown.
When one of the
preset programs is selected, the time remaining in
the program will be displayed.
• SPEED display—
This display shows
the speed of the
walking belt, in
miles per hour or
kilometers per
hour. An MPH or a KPH will appear in the display
to show which unit of measurement is selected.
To change the unit of measurement, hold down
the START/PAUSE button while inserting the key
into the console. An “E” for “English” (miles per
hour) or an “M” for “Metric” (kilometers per hour)
will appear in the DISTANCE/LAPS display. Press
the MODE button twice to change the unit of mea-
surement. Remove and then reinsert the key.
• CALS./FAT CALS.
display—This dis-
play shows the ap-
proximate num-
bers of calories
and fat calories
you have burned (see FAT BURNING on page 14
for an explanation of fat calories). Every seven
seconds, the display will change from one number
to the other. An “F” will appear in the display when
the number of fat calories is shown.
When you are finished, remove the key.
Step onto the foot
rails and remove the
key from the con-
sole. Store the key
in a secure place. In
addition, move the
on/off switch to the
“off” position. (See the drawing near the bottom of
page 8.)
7
10