Weslo Cadence Lx45 English Manual - Page 8

CONSOLE DIAGRAM Manual Indicator Program Indicator Displays LED Track Clip Key If there is a thin sheet of clear plastic on the face of the console, remove it. CAUTION: Before operating the console, read the following precautions. If the key is in the console, remove it. Make sure that the power cord is properly plugged in (see HOW TO PLUG IN THE POWER CORD on page 7). • Do not stand on the walking belt when turning on the power. • Always wear the clip (see the drawing above) while operating the treadmill. Next, step onto the foot rails of the treadmill. Find the clip attached to the key (see the drawing above), and slide the clip onto the waistband of your clothing. Follow the steps below to operate the console. • Adjust the speed in small increments. • To reduce the possibility of electric shock, keep the console dry. Avoid spilling liquids on the console, and use only a sealed water bottle. STEP-BY-STEP CONSOLE OPERATION 1 Insert the key fully into the console. The green manual mode indicator and the four displays will light. One indicator will begin to flash in the LED track. The treadmill console features a manual mode and four workout programs. When the manual mode is selected, the speed and incline of the treadmill can be changed with a touch of a button. As you exercise, the LED track and the four displays will provide continuous exercise feedback. When one of the workout programs is selected, the console will automatically control the speed as it guides you through an effective workout. Before operating the console, make sure that the on/off switch near the power cord is in the "on" position. "On" Position OFF ON 2 Press the MODE button to select the desired mode. When the key is inserted, the manual mode will be selected and the MANUAL indicator will be lit. If a workout program has been selected, press the MODE button repeatedly to select the manual mode. If you want to select one of the four workout programs, press the MODE button. The upper program indicator will light. To select one of the other three programs, press the MODE button repeatedly. 8