Weslo Crosswalk 365e Treadmill Canadian English Manual - Page 9
Make sure that all parts are properly tightened before you use the treadmill., Do not overtighten
View all Weslo Crosswalk 365e Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Attach the Storage Latch (66) to the left Upright (38) with 7 two 3/4" Screws (43) as shown. Do not overtighten the Screws. 38 66 43 8. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill. 9
9
8.
Make sure that all parts are properly tightened before you use the treadmill.
Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the
walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.
7.
Attach the Storage Latch (66) to the left Upright (38) with
two 3/4” Screws (43) as shown.
Do not overtighten the
Screws.
43
66
38
7