Weslo Momentum G 3.2 Elliptical English Manual - Page 8

Attach the Left Upper Body Arm 5 to

Get Weslo Momentum G 3.2 Elliptical PDF manuals and user guides View all Weslo Momentum G 3.2 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

5. Have a second person hold the Handlebar (52) near the Upright (2). See the inset drawing. Insert the Pulse Wires (A) through the Grommet (99), into the left side of the Upright (2), and pull them out of the top of the Upright. Then, press the Grommet into the left side of the Upright. Tip: Avoid pinching the Pulse Wires (A). Attach the Handlebar (52) to the Upright (2) with two M8 x 35mm Screws (86), two M8 Split Washers (63), and two M8 Washers (55). Then, press the Handlebar Cover (88) onto the Handlebar (52). 5 A 52 86 63 55 2 88 99 A Avoid pinching the Pulse Wires (A) 2 6. Identify the Right Upper Body Arm (6) and orient it as shown. 6 Next, orient an Upper Body Leg (64) so that the hexagonal holes are on the side shown. Insert the Right Upper Body Arm (6) into the Upper Body Leg (64). Attach the Right Upper Body Arm with two M8 x 40mm Bolts (56), two M8 Washers (55), two M8 Split Washers (63), and two M8 Acorn Nuts (58). Make sure that the heads of the Bolts are inside the hexago- nal holes. 5 Attach the Left Upper Body Arm (5) to the other Upper Body Leg (64) in the same way. 64 56 6 58 63 55 Hexagonal Holes 64 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
8
5.
Have a second person hold the Handlebar (52)
near the Upright (2).
See the inset drawing.
Insert the Pulse Wires
(A) through the Grommet (99), into the left side
of the Upright (2), and pull them out of the top of
the Upright. Then, press the Grommet into the
left side of the Upright.
Tip: Avoid pinching the Pulse Wires (A).
Attach the Handlebar (52) to the Upright (2)
with two M8 x 35mm Screws (86), two M8 Split
Washers (63), and two M8 Washers (55).
Then, press the Handlebar Cover (88) onto the
Handlebar (52).
5
6.
Identify the Right Upper Body Arm (6) and orient
it as shown.
Next, orient an Upper Body Leg (64) so that the
hexagonal holes are on the side shown.
Insert the Right Upper Body Arm (6) into the
Upper Body Leg (64). Attach the Right Upper
Body Arm with two M8 x 40mm Bolts (56), two
M8 Washers (55), two M8 Split Washers (63),
and two M8 Acorn Nuts (58).
Make sure that
the heads of the Bolts are inside the hexago-
nal holes.
Attach the Left Upper Body Arm (5) to the
other Upper Body Leg (64) in the same way.
6
56
55
63
58
64
6
5
64
Hexagonal
Holes
52
A
2
88
86
63
55
Avoid
pinching
the Pulse
Wires (A)
99
A
2