Weslo Pursuit 2.3 U Bike Canadian English Manual - Page 10
Note: The Locknuts, Split Washers,
View all Weslo Pursuit 2.3 U Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Have a second person hold the Console (2) near the Upright (3). Connect the wires on the Console to the Extension Wire (38) and to the Pulse Wires (19). Insert the excess wire into the Upright (3) or into the Console (2). Tip: Avoid pinching the wires. Attach the Console (2) to the Upright (3) with four M5 x 10mm Screws (55). 7 2 38 3 19 55 Avoid pinching the wires 8. Attach the Seat (6) to the Seat Post (7) with three M8 Locknuts (43), three M8 Split Washers 8 (54), and three M8 Large Washers (57). Note: The Locknuts, Split Washers, and 6 Large Washers may be preattached to the underside of the Seat. 7 57 57 54 54 43 43 9. Loosen and remove the Seat Knob (25) from the Frame (1). 9 Next, insert the Seat Post (7) into the Frame (1), adjust the Seat Post to the desired height, and insert the Seat Knob (25) into the indicated hole in the Frame and into one of the adjustment holes in the Seat Post. Tighten the Seat Knob (25). Make sure that the Seat Knob is inserted into one of the adjustment holes in the Seat Post (7). Adjustment Holes 7 25 1 Hole 10