Weslo Pursuit 700s English Manual - Page 9

11. Identify the Left Pedal (39) (there is an ÒLÓ on the 11 Left Pedal for identification). Using an adjustable wrench, tighten the Left Pedal counterclockwise into the left arm of the Crank (8). Tighten the Right Pedal (not shown) clockwise into the right arm of the Crank (8). 71 39 8 Adjust the Pedal Strap (71) on the Left Pedal (39) to the desired position. Press the Pedal Strap onto the Adjustment Tab on the Left Pedal. Adjust the Pedal Strap on the Right Pedal (not shown) in the same manner. Adjustment Tab 12. Make sure that all parts are properly tightened before you use the exercise cycle. Note: There may be some hardware left over after assembly is completed. HOW TO USE THE EXERCISE CYCLE HOW TO ADJUST THE POSITION OF THE SEAT FRAME The Seat Frame (2) can be adjusted to the position that is the most comfortable for you. To adjust the Seat Frame, first loosen the Frame Knob (29) on the right side of the Frame. Slide the Seat Frame forward or backward to the desired position. Tighten the Frame Knob. 2 29 HOW TO ADJUST THE PEDAL STRAPS To adjust the right Pedal Strap (70), first pull the 70 Pedal Strap off the Adjustment Tab on the pedal. Align a Adjustment Tab different hole in the Pedal Strap with the adjust- ment tab. Press the Pedal Strap onto the adjustment tab. Adjust the Pedal Strap on the Left Pedal (not shown) in the same manner HOW TO ADJUST THE PEDALING RESISTANCE The pedaling resistance can 32 be adjusted with 33 the Resistance Knob (32) locat- ed on the Console (33). To increase the resistance, turn the Resistance Knob clockwise; to decrease the resistance, turn the Resistance Knob counterclockwise. 9