Weslo Pursuit Easy 100 Bike Uk Manual - Page 9
Seat Post 5. Next, insert the Seat Knob 56
View all Weslo Pursuit Easy 100 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. While another person holds the Console (16) near the Upright (13), connect the console wire to the Extension Wire (23). Next, connect the console pulse wires to the Pulse Wires (59). Then, connect the console ground wire to the ground wire on the Upright (13). Insert the excess wire downward into the Upright (13). Tip: Avoid pinching the wires. Attach the Console (16) to the Upright (13) with four M4 x 15mm Screws (48). 6 Pulse Wires Ground Wires 59 13 16 Console Wire 23 48 7. Loosen and remove the Seat Knob (56) from 7 the Seat Carriage (58), which is located on the underside of the Seat (12). See the inset drawing. Look underneath the Seat (12) and locate the Seat Carriage (58). Next, locate the Seat Block (57) inside the Seat Carriage. Set the Seat Carriage (58) in the bracket on the Seat Post (5). Next, insert the Seat Knob (56) upward through the bracket on the Seat Post 12 into the hole in the Seat Block (57). Then, tight- en the Seat Knob. 12 58 57 5 56 58 57 9