Weslo Pursuit G 3.1 Bike English Manual - Page 13

To select the speed, time, distance, or calories mode for continuous display, press the Display Mode button repeatedly. An indicator will show which mode is selected. Make sure that there is not an indicator below the word Scan. The console can show speed and distance in either miles or kilometers. The letters “"mph”" or “"km/h”" will appear in the display to show which unit of measurement is selected. To change the unit of measurement, first hold down the Display Mode button for a few seconds. The newly selected unit of measurement will appear in the display. Repeat this action to change the unit of measurement again. Note: When the batteries are replaced, it may be necessary to reselect the desired unit of measurement. To pause the console, stop pedaling. If the time is displayed, it will flash. To continue your workout, simply resume pedaling. 3. When you are finished exercising, the console will turn off automatically. If the pedals do not move for a few seconds, the console will pause. If the pedals do not move for a few minutes, the console will turn off and the display will be reset. 13