Weslo Pursuit R 2.2 Bike English Manual - Page 8

4. Have a second person hold the Handlebar (42) near the Upright (13). Insert the Pulse Wires (A) into the Upright and pull them out of the top of the Upright. Avoid pinching the wires. Attach the Handlebar (42) to the Upright (13) with two M8 x 65mm Bolts (49) and two M8 Locknuts (10). Attach the Water Bottle Holder (3) to the Upright (13) with two M4 x 15mm Screws (48). 4 10 A 13 Avoid pinching the wires 42 5. The Console (16) can use four AA batteries (not included); alkaline batteries are recommended. 5 Do not use old and new batteries together or alkaline, standard, and rechargeable batter- ies together. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before insert- ing batteries. Otherwise, you may damage the console displays or other electronic components. Remove the battery cover from the back of the Console (16), and insert batteries into the battery compartment. Make sure to orient the batteries as shown by the diagram inside the battery compartment. Then, reattach the battery cover. 49 3 48 16 Battery Cover 8