Weslo Pursuit R 3.2 Bike English Manual - Page 12

12. While a second person holds the Console (16) near the Upright (13), connect the console wires 12 to the two Pulse Wires (67), the Extension Wire (52), and the Ground Wire (65). 16 67 Then, insert the wires into the Upright (13). 47 Tip: Avoid pinching the wires. Attach the Console (16) to the Upright (13) with four M4 x 16mm Self-tapping Screws (47). 13 52 65 Avoid pinching the wires 13. Identify the Left Pedal (24). 13 Using an adjustable wrench, firmly tighten the Left Pedal (24) counterclockwise into the left arm of the Crank (21). Tighten the Right Pedal (not shown) clockwise into the right arm of the Crank (not shown). Adjust the strap on the Left Pedal (24) to the 21 desired position, and press the end of the strap onto the tab on the Left Pedal. Adjust the strap on the Right Pedal (not shown) in the same way. 24 Tab Strap 14. Make sure that all parts are properly tightened before you use the exercise bike. After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it functions properly. Extra parts may be included. Place a mat under the exercise bike to protect the floor. 12