Weslo Summit St65 Stepper Owners Manual - Page 5
Assembly
View all Weslo Summit St65 Stepper manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Place all parts in a clear area and remove the packing materials. Do not dispose of the packing materials until the stepper is fully assembled and all parts are accounted for. Read the instructions below carefully before beginning. Assembly can be completed using the tools included and your own hammer. 1. Attach the Base (10) to the Frame (9) with the four! Base Bolts (36), Washers (4) and Base Nuts (37). 3 0 k -- -- 2. Stand the assembly upright on the Base (10). Attach the Stabilizer (33) to the Base with the two Stabilizer Bolts (35) and Acorn Nuts (27). Note: The square holes in the Stabilizer must be turned as shown. 9 4 10 27 27 33 3. Lay the Pedal Cable (17) over the Pulley (16). Slide the eyelets on either end of the Cable onto the hooks on the insides of the Left and Right Pedals (18 & 19). 16 17 19 18 eyelet hook 5