WestBend SE3000 Instruction Manual - Page 4

TO MIX, These gaskets should not be, removed., TO GO, Do not wash parts in the dishwasher, - blender

Page 4 highlights

frozen drinks. To make your favorite drink, follow these simple steps: TO MIX: 1. ADD ICE - Add ice or frozen ingredients to the line on the side of the mug. Frozen ingredients include ice, frozen fruit, frozen yogurt, ice cream, etc. 2. ADD LIQUIDS - Add any combination of liquid ingredients until the total level reaches up to the mark on the side of the mug. Liquids include any soft ingredients such as fruit, milk, fruit juice, herbal supplements, or yogurt in any combination you think would be tasty. 3. Place the blade base on the mug and turn clockwise to tighten. 4. With the blade base firmly attached to the mug, flip the mug over and secure the blade base onto the motor base by turning the mug clockwise. Note: The Smoothie Express™ includes a small, clear gasket inside the rim of the blade base as well as a travel lid. The gasket provides an effective seal between the mug and the blade base or lid. These gaskets should not be removed. If the clear gasket becomes dislodged from the blender base or lid, contact Focus Electrics' customer service. See warranty page. 5. Pulse the mixture 2 or 3 times by turning the dial to "PULSE." 6. Turn the dial on the motor base to "LOW" for 15 seconds to begin blending. 7. Turn the dial to "MED" until the ingredients are completely mixed. Note: After running the motor continuously for ninety seconds, wait at least three minutes before running the motor again. TO GO: 1. Unlock the mug from the motor base and then flip the mug over. 2. Turn the blade base counter-clockwise and remove it from the mug. 3. Place the mug lid on the mug and turn clockwise to tighten. Note: Do not store contents inside of the mug with the lid on. Pressure may build up inside of the mug causing the contents to expand rapidly when the cover is removed. CLEANING YOUR SMOOTHIE EXPRESS™ 1. Switch to "OFF" and unplug from the electrical outlet. 2. Wipe the motor base with a damp cloth or sponge. To remove stubborn spots, use a mild, non-abrasive cleanser. 3. Carefully wash all parts except for the motor base in warm, soapy water, rinse and dry thoroughly. Do not wash parts in the dishwasher. Note: If the lid or blade base is difficult to remove from the mug, rinse or soak the mug and the blade base or lid in warm, soapy water. Then, using a damp cloth to grip the lid or blade base, unscrew from the mug by turning the lid or blade base counterclockwise. THIS APPLIANCE HAS NO USER SERVICEABLE PARTS. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

4
frozen drinks. To make your favorite drink, follow these simple steps:
TO MIX:
1.
ADD ICE – Add ice or frozen ingredients to the
line on the
side of the mug. Frozen ingredients include ice, frozen fruit, frozen yogurt, ice
cream, etc.
2.
ADD LIQUIDS – Add any combination of liquid ingredients until the total level
reaches up to the
mark on the side of the mug. Liquids
include any soft ingredients such as fruit, milk, fruit juice, herbal supplements, or
yogurt in any combination you think would be tasty.
3.
Place the blade base on the mug and turn clockwise to tighten.
4.
With the blade base firmly attached to the mug, flip the mug over and secure the
blade base onto the motor base by turning the mug clockwise.
Note:
The Smoothie Express
includes a small, clear gasket inside the rim of
the blade base as well as a travel lid. The gasket provides an effective seal
between the mug and the blade base or lid.
These gaskets should not be
removed.
If the clear gasket becomes dislodged from the blender base or lid,
contact Focus Electrics’ customer service. See warranty page.
5.
Pulse the mixture 2 or 3 times by turning the dial to “PULSE.”
6.
Turn the dial on the motor base to “LOW”
for 15 seconds to begin blending.
7.
Turn the dial to “MED” until the ingredients are completely mixed.
Note:
After
running the motor continuously for ninety seconds, wait at least three minutes
before running the motor again.
TO GO:
1.
Unlock the mug from the motor base and then flip the mug over.
2.
Turn the blade base counter-clockwise and remove it from the mug.
3.
Place the mug lid on the mug and turn clockwise to tighten.
Note:
Do not store contents inside of the mug with the lid on. Pressure may
build up inside of the mug causing the contents to expand rapidly when the
cover is removed.
C
LEANING
Y
OUR
S
MOOTHIE
E
XPRESS
1.
Switch to “OFF” and unplug from the electrical outlet.
2.
Wipe the motor base with a damp cloth or sponge. To remove stubborn spots,
use a mild, non-abrasive cleanser.
3.
Carefully wash all parts except for the motor base in warm, soapy water, rinse
and dry thoroughly.
Do not wash parts in the dishwasher
.
Note:
If the lid or
blade base is difficult to remove from the mug, rinse or soak the mug and the
blade base or lid in warm, soapy water. Then, using a damp cloth to grip the lid
or blade base, unscrew from the mug by turning the lid or blade base counter-
clockwise.
THIS APPLIANCE HAS NO USER SERVICEABLE PARTS.