Whirlpool EL87TRRRV Use and Care Manual - Page 6

Handle, Style, Loosen, Replace, and Hinges, Final - parts

Page 6 highlights

Handle Move the door handle from one side of the door to the other. Style 1 1. Loosen set screws located on side of handle at each end. See Graphic 1-1. 2. Remove handle from grommets. 3. Using a 1/4"hex-head socket wrench, remove the grommets from the door. 4. Position the grommets on the opposite side of the door and reinstall. 5. Position the handle over grommets on the opposite side of the refrigerator door. 6. Ensure grommets are fitted into handle holes. 7. Tighten the upper and lower set screws with hex key provided. Do not overtighten set screws. Style 2 1. Slide the handle up and off the clips. See Graphic 1-2, 2. Using a flat-blade screwdriver, remove the screws from the clips and remove the clips from the door. 3. Position the clips on the opposite side of the refrigerator door and reinstall the screws. 4. Position handle over the clips. 5. Apply even pressure and push down to lock in place. Replace Door and Hinges NOTE: Graphic may be reversed if door swing is reversed. 1. Replace the parts for the bottom hinge as shown and tighten screws, See Bottom Hinge Graphic 1C, Replace the refrigerator door. NOTE: Provide additional support for the door while the hinges are being moved, Do not depend on the door magnets to hold the door in place while you are working. 2. Assemble the parts of the top hinge as shown in the Top Hinge Graphic 1B. Do not tighten the screws completely, 3. Line up the door so that the bottom aligns evenly with the cabinet. Tighten all screws. Final Steps 1. Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover. See Top Hinge Graphic 1B. 2. Replacethe base grille. See Base Grille Graphic 1A. Electrica_ Shock Hazard P_ug into a grounded 3 prong outlet, Do not remove ground prong, Do not use an adapter, Do not use an extension cord, Failure to follow these instructions can resuR in death, fire, or electrica_ shock, 3. Plug into a grounded 3 prong outlet. 4. Reset the control. See "Using the Control." 5. Return all removable door parts to door and food to refrigerator.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Handle
Move the door handle from one side of the door to the other.
Style
1
1.
Loosen
set screws
located
on side of handle at each end.
See Graphic
1-1.
2.
Remove
handle from grommets.
3.
Using a 1/4"hex-head socket
wrench,
remove the grommets
from the door.
4.
Position
the grommets
on the opposite
side of the door and
reinstall.
5.
Position
the handle
over grommets
on the opposite
side of
the refrigerator
door.
6.
Ensure grommets
are fitted
into handle holes.
7.
Tighten the upper and lower
set screws
with hex key
provided.
Do not overtighten
set screws.
Style
2
1.
Slide the handle up and off the clips. See Graphic
1-2,
2.
Using a flat-blade
screwdriver,
remove the screws from the
clips and remove the clips from the door.
3.
Position the clips on the opposite
side of the refrigerator
door
and reinstall the screws.
4.
Position
handle over the clips.
5.
Apply even pressure
and push down
to lock in place.
Replace
Door
and Hinges
NOTE:
Graphic
may be reversed
if door swing is reversed.
1.
Replace the parts for the bottom
hinge as shown
and tighten
screws,
See Bottom
Hinge Graphic
1C, Replace the
refrigerator
door.
NOTE:
Provide
additional
support
for the door while the
hinges are being moved, Do not depend on the door magnets
to hold the door in place while you are working.
2.
Assemble
the parts of the top
hinge as shown
in the Top
Hinge Graphic
1B. Do not tighten
the screws
completely,
3.
Line up the door so that the bottom
aligns evenly with the
cabinet.
Tighten
all screws.
Final
Steps
1.
Check all holes to make sure that hole plugs and screws
are
in place. Reinstall
top hinge cover. See Top Hinge
Graphic
1B.
2.
Replacethe
base grille. See Base Grille Graphic
1A.
Electrica_
Shock
Hazard
P_ug
into
a grounded
3
prong
outlet,
Do not remove
ground
prong,
Do not use an adapter,
Do not use an extension
cord,
Failure
to follow
these
instructions
can resuR in death,
fire, or electrica_
shock,
3.
Plug into a grounded
3 prong outlet.
4.
Reset the control.
See "Using the Control."
5.
Return
all removable
door parts to door and food to
refrigerator.