Whirlpool RBD245PDB Use and Care Manual - Page 40

removing the oven door, standard-cleaning, ovens, To remove, To replace

Get Whirlpool RBD245PDB PDF manuals and user guides View all Whirlpool RBD245PDB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Removing the oven door (standard-cleaning ovens only) Removing the oven door will help make it easier to clean the oven. Personal Injury Hazard l Oven door is heavy. Use both hands to remove the oven door. l Grasp only the sides of the oven door. Do not use the handle for lifting. Failure to properly grasp the oven door could result in personal injury or product damage. To remove: I, Open the door all the way. 4. Grasp the sides of the oven door. Move door toward oven and lift slightly to remove. 5. Set door aside on protected surface. To replace: 1. Fit hinge arms into slots in frame. r removal pin one in each hole) 2. Insert a door removal pin into each hinge hole from the inside, out. 3. Close the door V4 of the way shut or until it contacts the pins. 40 I 2. Open the door all the way. 3. Remove the door removal pins from each hole. 4. Close the door. NOTE: If the door does not operate freely, you have not installed it properly. Repeat Steps l-4.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
Removing
the oven
door
(standard-cleaning
ovens
only)
Removing
the oven door will help make it
easier to clean the oven.
Personal
Injury
Hazard
l
Oven door is heavy. Use both hands to
remove the oven door.
l
Grasp only the sides of the oven door.
Do not use the handle for lifting.
Failure to properly grasp the oven door
could result in personal injury or product
damage.
To remove:
I, Open the door all the way.
r removal pin
one in each hole)
2. Insert a door removal pin into each hinge
hole from the inside, out.
3. Close the door
V4
of the way shut or until
it contacts the pins.
4. Grasp the sides of the oven door. Move
door toward oven and lift slightly
to
remove.
5. Set door aside on protected surface.
To replace:
1. Fit hinge arms into slots in frame.
I
2. Open the door all the way.
3. Remove the door removal pins from
each hole.
4.
Close the door.
NOTE: If the door does not operate freely,
you have not installed
it properly.
Repeat
Steps l-4.
40