Whirlpool UXD8636DYS Installation Guide - Page 6

Cabinet Dimension A 12.7 mm) minimum 10" (25.4 cm) 21 54.1 cm) 21 54.1 cm) Cutouts are for 3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm) round vent system. Locate power supply junction box at lower left hand rear corner of the cabinet. NOTES: ■ See cooktop manufacturer's instructions for cooktop cutout depth and width. ■ Use dimensions for vent system cutout location that applies to your installation. Centerline of cooktop cutout ■ Interior mounted blower systems connect with 3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm) round vent system. The cutout locations for this vent system will depend on your specific installation. Countertop Cutout Dimensions IMPORTANT: Countertops with a bull-nosed front edge are not recommended for these installations. Some models require a countertop deeper than 25" (63.5 cm); see the following "Countertop Cutout Dimensions Chart." To avoid mistakes, it is recommended that the cooktop and vent cutouts be drawn on the countertop before making any cutouts. See the Installation Instructions that came with your cooktop for complete cutout dimensions, location dimensions and installation details. D E F B C G H A I A. Downdraft vent B. Cooktop C. Measurement of cooktop rear overhang D. D = Measurement of cooktop rear overhang (C) + 1 46.2 mm] (E) E. 1 46.2 mm) F. ½" (12.7 mm) minimum G. ¼" (6.4 mm) minimum H. Countertop and backsplash I. ½" (12.7 mm) minimum 6