Whirlpool WDF330PAHS Use & Care Guide - Page 9
Controls And Cycle Status - not draining
View all Whirlpool WDF330PAHS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPTION SELECTIONS OPTIONS Runs dishwasher at a later time. Select a wash cycle and options. Each time you press the Delay button, it will display the next available delay time. Press 4 HR DELAY. Press START/RESUME. Close door firmly. NOTES: ■■ The dishwasher remembers the last Delay you selected. To reset the Delay time to something other than what is displayed, continue to press the Delay button until the desired delay time is reached. ■■ Anytime the door is opened (such as, to add a dish), Start/Resume must be pressed again to resume delay countdown. CAN BE SELECTED WITH WHAT IT DOES ADDED TIME ADDED TO CYCLE WATER GALLONS (LITERS) Available with Delay 4 hours 0:00 0 any cycle To turn on lock, press and hold 4 HR DELAY for 3 seconds. Control Lock light will stay on for a short time, indicating that it is activated and all buttons are disabled. If you press any button while your dishwasher is locked, a light flashes three times. Dishwasher door can still be opened/closed while the controls are locked. To turn off Lock, press and hold 4 HR DELAY for 3 seconds. Light turns off. CONTROL CONTROLS AND CYCLE STATUS PURPOSE COMMENTS Press to start or resume a wash cycle. If the door is opened during a cycle or the power is interrupted, the Start/Resume button LED flashes. Cycle will not resume until door is closed and Start/Resume is pressed. Press to cancel wash cycle. Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let dishwasher drain completely. Press CANCEL again to fully cancel machine. The Clean indicator glows when a cycle is finished. 9