Whirlpool WDF518SAHW Owners Manual - Page 5
What It Does
View all Whirlpool WDF518SAHW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
OPTIONS CAN BE WHAT IT DOES SELECTED WITH Raises the main wash temperature to improve cleaning for loads containing tough, baked-on food. Heavy Normal Light Raises the main wash temperature to140°F (60°C). ADDED TIME ADDED WATER TO CYCLE GALLONS (LITERS) 0:05 - 1:00 0 - 2.0 G (0 - 8.0 L) Dries dishes with heat. This option, with the use Uses a heating 0:05 NA of rinse aid, will provide the best drying results. Heavy element to speed Plastic items are less likely to deform when loaded Normal drying times. in the top rack. Use Heated Dry for optimum drying Light Heated Dry option performance. For air dry, turn off Heated Dry Quick defaults to On when any cycle is selected, except for Rinse. Delay displays how many hours before the cycle Available Delays start of 1:00 - 24:00 NA will begin. with any a cycle up to To delay the start: cycle 24 hours. 1. Select a wash cycle and options. 2. Press DELAY for each hour of delay time. 3. Press START/Cancel to begin the delay countdown. NOTE: If the door is opened, such as to add a dish, the Start/Cancel button must be pressed to resume the delay countdown. Control Purpose Comments Press to start or If the door is opened during a cycle or the power is interrupted, the cycle will not resume until resume a wash cycle. the Start/Cancel button is pressed again. Press and hold to With the door closed and the cycle or delay running, press and hold the START/Cancel button cancel wash cycle. for 3 seconds. The dishwasher will start a 60-second drain. Let dishwasher drain completely. Press and release once to temporarily interrupt the cycle without canceling. With a cycle running, press and release the START/Cancel button once. This will interrupt the cycle without canceling. Opening the door will also interrupt the cycle in the same way. Close the door and press START/Cancel again to resume the cycle. Use to avoid unintended use of dishwasher between cycles, or cycle and option changes during a cycle. Use the Control Lock option to avoid unintended use of dishwasher between cycles or cycle and option changes during a cycle. To turn on Control Lock, press and hold both OPTIONS and DELAY for 3 seconds. The Control Lock indicator light next to the time display will turn red indicating that it is activated. When the lock indicator is lit, all buttons are disabled. If you press any button while your dishwasher is locked, the light flashes once. The dishwasher door can still be opened and closed while the controls are locked. To turn off Control Lock, press and hold both OPTIONS and DELAY for 3 seconds. Control Lock indicator light will turn off. 5