Whirlpool WDF530PLYB Use & Care Guide - Page 10

OPTION SELECTIONS OPTIONS PURPOSE Control Lock To avoid unintended use of your dishwasher, or cycle and option changes during a cycle. DESCRIPTIONS To turn on Lock, press and hold Control Lock for at least 3 seconds. To turn off Lock, press and hold Control Lock for at least 3 seconds. When Control Lock is lit, all buttons are disabled. If you press any pad while your dishwasher is locked, the light flashes 3 times. The dishwasher door can be opened while the controls are locked. USE WITH: Anytime CONTROLS AND CYCLE STATUS CONTROL PURPOSE COMMENTS Press to start or If the door is opened during a cycle or the power is interrupted, the Start/Resume indicator resume a wash cycle flashes. The cycle will not resume until the door is closed and Start/Resume is pressed. Press to cancel wash cycle Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely. To follow the progress of your dishwasher cycle Clean indicator glows when a cycle is finished. If you select the Sani Rinse option, when the Sani Rinse cycle is finished, the "Sanitized" indicator glows. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the cycle. This can happen if the cycle is interrupted, or the water could not be heated to the required temperature. The light goes off when you open or close the door or press CANCEL. 10