Whirlpool WDT720PADM Use & Care Guide - Page 11

EZ-2-Lift™ Top Rack Adjuster on some models, Removable Top Rack, To replace the rack

Page 11 highlights

EZ-2-Lift™ Top Rack Adjuster (on some models) You can raise or lower the top rack to fit tall items in either the top or bottom rack. Adjusters are located on each side of the top rack. To raise or lower the rack with adjuster 1, hold the top rack with one hand near the adjuster and use the other hand to pull out the top of the adjuster. Raise or lower the rack to one of the preset positions. Rack adjuster 1 To raise the rack with adjuster 2, lift and pull up. To lower the rack, lift up and let down. NOTE: The top rack must be level. Rack adjuster 2 Removable Top Rack The removable top rack allows you to wash larger items such as pots, roasters, and cookie sheets in the bottom rack. IMPORTANT: Remove dishes prior to removing the top rack from dishwasher. To remove the rack 1. To gain access to the track stops, pull the upper rack forward about halfway out of the tub. 2. To open, flip the track stop toward the outside of the tub. 3. After opening both track stops, pull top rack out of the rails. 4. Close track stops and slide the tracks back into the dishwasher. To replace the rack 1. Gently pull tracks forward in dishwasher until they stop. Open track stops. 2. Place the back wheels on each side of the rack into the track slot and roll them back into the tracks, but do not push the rack all the way into the tub. 3. Insert front rack wheels on each side of the rack into the track slots. 4. Slide rack into the dishwasher. The stops will automatically close when rack enters dishwasher. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51

11
EZ-2-Lift™ Top Rack Adjuster (on some models)
You can raise or lower the top rack to fit
tall items in either the top or bottom
rack. Adjusters are located on each
side of the top rack.
To raise or lower the rack with adjuster
1, hold the top rack with one hand near
the adjuster and use the other hand to
pull out the top of the adjuster. Raise or
lower the rack to one of the preset
positions.
To raise the rack with
adjuster 2, lift and pull up.
To lower the rack, lift up
and let down.
NOTE:
The top rack must
be level.
Removable Top Rack
The removable top rack allows you to wash larger items such as
pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT:
Remove dishes prior to removing the top rack from
dishwasher.
To remove the rack
1.
To gain access to the
track stops, pull the
upper rack forward
about halfway out of the
tub.
2.
To open, flip the track
stop toward the outside
of the tub.
3.
After opening both track
stops, pull top rack out
of the rails.
4.
Close track stops and
slide the tracks back into
the dishwasher.
To replace the rack
1.
Gently pull tracks forward in dishwasher until they stop. Open
track stops.
2.
Place the back wheels on each side of the rack into the track
slot and roll them back into the tracks, but do not push the
rack all the way into the tub.
3.
Insert front rack wheels on each side of the rack into the track
slots.
4.
Slide rack into the dishwasher. The stops will automatically
close when rack enters dishwasher.
Rack adjuster 1
Rack adjuster 2