Whirlpool WDT920SADM Installation Guide - Page 13
Make Power Supply Cord Connection
View all Whirlpool WDT920SADM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Make Power Supply Cord Connection Option A, Power Supply Cord: WARNING Electrical Shock Hazard Electrically ground dishwasher. Connect ground wire to green ground connector in terminal box. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Route cord so that it does not touch dishwasher motor to lower part of dishwasher tub. Pull cord through strain relief in terminal box. Select UL Listed/CSA Approved twist-on wire connectors rated to connect your power supply cord to 16-gauge dishwasher wiring. Remove the ground connector screw and place through the ring terminal of the green ground wire. Reattach and tighten the ground connector screw. NOTE: Do not pre-twist stranded wire. Twist on wire connector. Gently tug on wires to be sure both are secured. 13