Whirlpool WDT970SA Owners Manual - Page 28
if dishwasher does not operate
View all Whirlpool WDT970SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
52. Reinstall access panels Use a 5/16" nut driver to reinstall the screws through the holes in the access panels. IF DISHWASHER DOES NOT OPERATE First try the solutions suggested here to possibly avoid the cost of a service call. ■ Has the circuit breaker tripped or the house fuse blown? ■ Is the door closed tightly and latched? ■ Has the cycle been set correctly to start the dishwasher? ■ Is the water turned on? ■ Is the float switch wire under the product connected to the float switch? ■ Make sure control lock is not on. If none of these possible solutions work, please see the Quick Start Guide for service contact information. 28
28
Use a 5/16" nut driver to reinstall the screws through the holes in
the access panels.
IF DISHWASHER DOES NOT OPERATE
First try the solutions suggested here to possibly avoid the cost
of a service call.
■
Has the circuit breaker tripped or the house fuse blown?
■
Is the door closed tightly and latched?
■
Has the cycle been set correctly to start the dishwasher?
■
Is the water turned on?
■
Is the float switch wire under the product connected to the float
switch?
■
Make sure control lock is not on.
If none of these possible solutions work, please see the Quick
Start Guide for service contact information.
52.
Reinstall access panels