Whirlpool WED4900XW Installation Instructions - Page 17
Lift door off top screws
UPC - 883049200064
View all Whirlpool WED4900XW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
5. Insert screws in hinge holes on dryer cabinet 2. Remove bottom screws NOTE: Two people maybe needed to reinstall door. Insert screws into bottom holes on left side of dryer cabinet. Tighten screws halfway. Position door so large end of door hinge slot is over screws. Slide door up so screws are in bottom of slots. Tighten screws. Insert and tighten top screws in hinges. 6. Check door strike alignment Open dryer door. Remove bottom screws from dryer cabinet side of hinges. Loosen (do not remove) top screws from dryer cabinet side of hinges. 3. Lift door off top screws Close door and check that door strike aligns with door catch. If needed, slide door catch left or right within slot to adjust alignment. Super Wide Side-Swing Door 1. Place towel on dryer Lift door until top screws in dryer cabinet are in large part of hinge slot. Pull door forward off screws. Set door (handle side up) on top of dryer. Remove top screws from dryer cabinet. 4. Remove screws from hinges Remove screws attaching hinges to door. Place towel on top of dryer to avoid damaging the surface. 17