Whirlpool WED4900XW Installation Instructions - Page 18
Remove door strike, Rotate outer door, Attach door hinges, Flip door over, Remove screws from door
UPC - 883049200064
View all Whirlpool WED4900XW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
5. Remove screws from door 8. Attach door hinges Remove screws at top, bottom, and side of door (4 screws). Keep door screws separate from hinge screws as they are diferent sizes. Holding door over towel on dryer, grasp sides of outer door and lift to separate it from inner door. NOTE: Do not pry apart with putty knife or screwdriver. Do not pull on door seal or plastic door catches. 6. Rotate outer door Take outer door and rotate in 180º and set it back down on inner door. Be certain to keep cardboard spacer centered between doors. Reattach outer door panel to inner door panel so handle is on the side where hinges were just removed. Insert 4 door screws. 7. Flip door over Reattach door hinges to dryer door so that the larger hole is at the bottom of the hinge. 9. Remove door strike Flip door over so handle side is down. Remove door strike from dryer cabinet and set aside. 18