Whirlpool WED7300XW Installation Instructions - Page 8

2. Connect neutral ground wire and neutral wire 3-wire Power Supply Cord Connection Use where local codes permit connecting cabinet-ground conductor to neutral wire. E B C 3-wire receptacle (NEMA 3-prong plug type 10-30R) Connect neutral ground wire (E) and neutral wire (white) (C) of power supply cord under center terminal block screw (B). Tighten screw. 3. Connect ground wire A F Spade terminals with upturned ends Ring terminals 1. Remove center screw B Connect ground wire (F) (green or bare) of power supply cord to external ground conductor screw (A). Tighten screw. 4. Connect remaining wires Remove center terminal block screw (B). 2. Connect neutral wire B C Connect remaining wires to outer terminal block screws. Tighten screws. Finally, reinsert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down screw. Now, go to "Venting Requirements". Connect neutral wire (white or center) (C) of power supply cord to center terminal block screw (B). Tighten screw. 8