Whirlpool WEE745H0FS Use & Care Guide - Page 8
Electronic Oven Controls, End of Cycle Tone
View all Whirlpool WEE745H0FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Electronic Oven Controls Control Display The display will flash when powered up or after a power loss. Press CANCEL to clear. When the oven is not in use, the time of day is displayed. If the range is in Energy Save mode, the display will be blank when not in use. Tones Tones are audible signals, indicating the following: One Tone ■■ Valid keypad press ■■ Oven is preheated (long tone) ■■ Function has been entered ■■ Reminder, repeating each minute after the end-of-cycle tones Three Tones ■■ Invalid keypad press Four Tones ■■ End of cycle Use the Settings/Clock keypad to change the tone settings. Energy Save The Energy Save mode puts the range into sleep mode and reduces energy consumption. To Activate the Energy Save Mode: 1. Press and hold SETTINGS/CLOCK for 3 seconds. "Energy saver on." will appear in the display. 2. The setting will be activated after 5 minutes. To Deactivate the Energy Save Mode: 1. Press and hold SETTINGS/CLOCK for 3 seconds. "Energy saver off." will appear in the display. 2. The clock will reappear in the display and the range can be operated as usual. Settings Many features of the oven control can be adjusted to meet your personal needs. These changes are made using the Settings/ Clock keypad. Use the Settings/Clock keypad to scroll through the features that can be changed. Each press of the Settings/Clock keypad will advance the display to the next setting. After selecting the feature to be changed, the control will prompt you for the required input. Then press START or CANCEL to exit and display the time of day. Details of all of the feature changes are explained in the following sections. Press CANCEL to exit Settings. Clock The Clock can use a 12- or 24-hour cycle. 1. Press SETTINGS/CLOCK until "CLOCK" is displayed. 2. Press START to change the time. 3. Press "3" for AM or "6" for PM. 4. Use the number keypads to set the time of day. 5. Press START or CANCEL to exit and display the time of day. Fahrenheit and Celsius The temperature is preset to Fahrenheit but can be changed to Celsius. 1. Press SETTINGS/CLOCK until "TEMP UNIT" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press START or CANCEL to exit and display the time of day. Audible Tones Disable Turns off all tones, including the end-of-cycle tone and keypress tones. Reminder tones are still active when all tones are disabled. 1. Press SETTINGS/CLOCK until "SOUND" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press START or CANCEL to exit and display the time of day. Sound Volume Sets the volume of the tone to either high or low. 1. Press SETTINGS/CLOCK until "SOUND VOLUME" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press START or CANCEL to exit and display the time of day. End of Cycle Tone Activates or turns off the tones that sound at the end of a cycle. 1. Press SETTINGS/CLOCK until "END TONE" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press START or CANCEL to exit and display the time of day. Keypress Tones Activates or turns off the tones when a keypad is pressed. 1. Press SETTINGS/CLOCK until "KEYPRESS TONE" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press START or CANCEL to exit and display the time of day. Reminder Tones Disable Turns off the short repeating tone that sounds every 1 minute after the end-of-cycle tones. 1. Press SETTINGS/CLOCK until "REMINDER TONE" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press START or CANCEL to exit and display the time of day. 12/24 Hour Clock 1. Press SETTINGS/CLOCK until "12/24 HOUR" is displayed. 2. The current setting will be displayed. 3. Press the "1" keypad to adjust the setting. 4. Press START or CANCEL to exit and display the time of day. 8