Whirlpool WET3300XQ Use & Care Guide - Page 11

7. Select LOAD SIZE 9. Select FABRIC SOFTENER On or Off Select the load size setting most suitable for your load. Small will add a low amount of water for smaller loads and Large will add the most amount of water for large or bulky loads. Items need to move freely. 8. Select TEMPERATURE Set FABRIC SOFTENER to ON if you want to add fabric softener. IMPORTANT: Fabric Softener option must be selected to "On" to ensure proper distribution at correct time in cycle. Do not overfill or dilute. 10. Pull out Cycle knob to begin wash cycle Once you select a cycle, select the desired wash temperature by turning the WASH TEMP knob to the appropriate setting based on your load. All rinses are tap cold. NOTE: Always read and follow fabric care label instructions to avoid damage to your garments. Wash Temp Suggested Fabrics Hot Some cold water is added to save energy. This will be cooler than your hot water heater setting. Whites and pastels Durable garments Heavy soils Warm Some cold water will be added, so this will be cooler than what your previous washer provided. Bright colors Moderate to light soils Cool Warm water may be added to assist in soil removal and to help dissolve detergents. Colors that bleed or fade Light soils Cold This is the temperature from your faucet. If your tap cold water is very cold, warm water may be added to assist in soil removal and help dissolve detergent. Dark colors that bleed or fade Light soils Pull out the Cycle knob to start the washer. To stop or restart your washer: • To stop the washer at any time, push in the Cycle knob. • To restart the washer, close the door (if open) and pull out the Cycle knob. 11