Whirlpool WFG110AVQ Installation Instructions - Page 15
Std Burner 149, Super Burner 165 - gas range model
UPC - 883049146980
View all Whirlpool WFG110AVQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
To Convert Surface Burners 1. Remove burner grate, burner caps and burners. A B For models with 4 standard burners: Std Burner 149 Std Burner 149 Std Burner 149 Std Burner 149 For models with 3 standard burners and 1 super burner: A. Burner cap B. Burner 2. Locate the Natural gas orifice spuds for top burners in the literature bag included with the range. Three natural gas spuds are stamped "149" and one "165." 3. Remove the LP gas orifice spuds using a 7 mm combination wrench. 4. Install the Natural gas orifice spuds using a 7 mm combination wrench. Std Burner 149 Super Burner 165 Std Burner 149 Std Burner 149 5. Place LP gas orifice spuds in the parts bag for future use and keep with the bag containing literature. 6. Reinstall burners, burner caps and burner grates. A To Convert Oven Burner 1. Open the oven door and remove oven racks, oven tray, flame spreader and set aside. 2. Lift oven burner. The orifice spud is behind the oven burner B air shutter. A. Spud B. Holder NOTE: Depending on model, the range cooktop may be equipped with 4 standard burners or 3 standard burners and 1 super burner. Spud size and location remain the same. A B A. Oven burner B. Air shutter 15