Whirlpool WFW5090J Installation Guide - Page 5
Other Options, Start/pause Button, Dispenser Drawer, Led Display
View all Whirlpool WFW5090J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
7 OTHER OPTIONS Save Time This option enables quicker washing. Only recommended for lightly soiled laundry. Extra Rinse This option helps to avoid detergent residues in the laundry by extending the rinse time. Especially suitable for baby laundry, people with allergies, or areas with soft water. Heavy Soil This option optimizes the stain-removal efficiency of additives. Ideal for heavily soiled, stained laundry. Add an appropriate amount of powder in-wash additive for stain removal to the main wash compartment, together with your detergent (powder only). This may extend the program by up to 15 minutes. Appropriate for use with oxygen-based stain removers. IMPORTANT: Chlorine or perborate bleach agents must not be used. Cold Water PreWash for Stains This option helps remove all kinds of stains (except grease/oil) by beginning with a cold water wash and adding 10 minutes to the cycle. NOTE: Pretreatment is recommended for stubborn stains. Warm Rinse This option ends with a warm rinse. This rinse relaxes the fibers of your laundry to make it feel comfortably warm when removed soon after the program/cycle ends. PreWash This option helps to clean heavily soiled laundry by adding a 20-minute prewash to the program/cycle selected. Control Lock This option allows you to lock the buttons and knob to avoid unwanted use by small children or other unqualified persons. Touch and hold the Option button until the "key" symbol lights up. All controls will be locked except for the Power button. To cancel Key Lock, touch and hold the Option button until the key symbol goes off. 8 START/PAUSE BUTTON Touch to start, or touch and hold to pause, a program/ cycle. When you start a program/cycle, the display shows an animation of chasing LEDs. This indicates the washer is estimating dry load size. Once the load size is estimated, water will be added to start the wash cycle. 9 LED DISPLAY When you select a program/cycle, its default settings will light up and the Estimated Time Remaining will be displayed. Factors such as load size, wash temperature, and water pressure may affect the time shown in the display. Tightly packing, unbalanced loads, or excessive suds may cause the washer to lengthen the program/cycle time, as well. Symbols Door can be opened. Water supply is inadequate. Water cannot be drained. Drain pump filter, drain hose, or pump may be blocked. Check drain hose for kinks or clean the filter as shown in "Washer Maintenance." Call for service. Dosing aid symbols. Dispenser Drawer The dispenser drawer gives you the convenience of adding HE detergent and liquid fabric softener to the wash load at the proper time. See "Using the Dispenser Drawer" for information on using the dispenser drawer. A C B A Liquid fabric softener compartment Automatically dilutes and dispenses liquid fabric softener at the optimum time in the cycle. n Use only liquid fabric softener in this dispenser. B Prewash compartment When using the PreWash option, add detergent here or directly into the drum. C Main wash compartment This compartment holds liquid or powdered HE detergent for your main wash cycle. If PreWash detergent has been added to the drum, use powdered detergent in the main wash compartment; this ensures that the detergent stays in the detergent dispenser until the start of the main wash phase. IMPORTANT: Do not use chlorine bleach in this washer. 5