Whirlpool WFW5090JW Dimension Guide - Page 1
Whirlpool WFW5090JW Manual
View all Whirlpool WFW5090JW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Washer PRODUCT MODEL NUMBERS WFW3090G, WFW5090G Location Requirements Proper installation is your responsibility. You will need: n A grounded electrical outlet located within 5.4 ft (1.7 m) of power cord on back of washer. n Water faucet located within 4 ft (1.2 m) of water fill valve on washer, and water pressure of 20-100 psi (137.9-689.6 kPa). n A level floor with maximum slope of 1" (25 mm) under entire washer. Installing on carpet or surfaces with foam backing is not recommended. n Floor must support washer's total weight (with water and load) of 400 lbs (180 kgs). IMPORTANT: Do not install, store, or operate washer where it will be exposed to weather or in temperatures below 32°F (0°C). Water remaining in washer after use may cause damage in low temperatures. See "Washer Maintenance" for winterizing information. 24" (610 mm) Space must be large enough to allow door to fully open. Add spacing of 1" (25 mm) on all sides of washer to reduce noise transfer. If a closet door or louvered door is installed, top and bottom air openings in door are required. Recessed area or closet installation (stacked washer and dryer): 0"/1" (0 mm/25 mm) 04""/*1†" (0 m(1m02/2m5mm)m) 3" (76 mm) 683⁄4" Min. (1764563/4m" m) (619617⁄20" mMmax). (1765 mm) 48 in.2 (310 cm2) 3" (76 mm) 24 in.2 (155 cm2) 3311⁄/42""MMiinn.. ((884551 mmmm)) 33((33883355⁄/4747""mMmMmamax)x).. 01"/"1*" (0 m(2m5/m25mm) m) 0"/1" (0 m1m"/*25 mm) (25 mm) †External exhaust elbow requires additional space. Custom under counter installation: *Recommended spacing. Minimum 0" (0 mm) 2†4" (610 mm) 41*1/2" (1054 mm) 39" min. (990 mm) 1" (25 mm) Custom cabinet installation: 1" (25 mm) 7" (178 mm) 19" ((22259mmmm)) 3" (76 mm) 48 in.2 min. (310 cm2) *2.3 1.9 cu. cu. ft. ft. models: models: 442115⁄58⁄1"6("10(1(5107893m1/m4"mmmm)) ) † 2.3 cu. ft. models: 251⁄8" (638 mm) 1.9 cu. ft. models: 24" (610 mm) All dimensions show recommended spacing allowed, except for closet door ventilation openings which are the minimum required. For each arrangement, consider allowing more space for ease of installation and servicing, and spacing for companion appliances and clearances for walls, doors, and floor moldings. 4"* (102 mm) 1" * (25 mm) 1" * (25 mm) 24 in.2 min. (155 cm2) 3" (76 mm) *Recommended spacing. Minimum 0" (0 mm) W10856086B 1/2017