Whirlpool WFW72HEDW Installation Guide - Page 2

Installation Requirements - pedestal

Page 2 highlights

INSTALLATION REQUIREMENTS TOOLS AND PARTS Gather required tools and parts before starting installation. Tools needed: Adjustable or open end wrenches 1/2" (13 mm) and 9/16" (14 mm) 4" min (102 mm) Level Wood block Ruler or measuring tape Pliers that open to 19⁄16" (39.5 mm) Optional tools: Flashlight Bucket Parts needed: (Not supplied with washer) Water inlet hoses (2) Flat inlet hose washers (4) Parts supplied: NOTE: All parts supplied for installation are in the washer basket. Drain hose with clamp and form (may be shipped unassembled) Available Accessories: An optional matching pedestal is available for your washer. Please contact your retailer for ordering information, or see the "Assistance or Service" page on the back of your "Use and Care Guide". Alternate parts: (Not supplied with washer) Your installation may require additional parts. To order, please refer to toll-free numbers on the back page of your "Use and Care Guide". If you have: Overhead sewer 1" (25 mm) standpipe Drain hose too short Lint clogged drain Floor drain system You will need: Standard 20 gal. (76 L) 39" (990 mm) tall drain tub or utility sink, sump pump and connectors (available from local plumbing suppliers) 2" (51 mm) diameter to 1" (25 mm) diameter Standpipe Adapter Part Number 3363920 Connector Kit Part Number 285835 Extension Drain Hose Part Number 285863 Connector Kit Part Number 285835 Drain Protector Part Number 367031 Connector Kit Part Number 285835 Siphon Break Kit Part Number 285834 Connector Kit (x2) Part Number 285835 Extension Drain Hose Part Number 285863 Alternate Inlet Hoses: (may be required for some installations, not supplied with washer) n 8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack) n 8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack) n 8212546RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack) n 8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM (2 pack) n 8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack) n 8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space saving 90° elbow, hypro-blue steel couplings (2 pack) n 8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space saving 90° elbow, hypro-blue steel couplings (2 pack) Cable tie 2 Transport bolt hole plugs (4)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

2
Alternate parts:
(Not supplied with washer)
Your installation may require additional parts. To order, please
refer to toll-free numbers on the back page of your “Use and
Care Guide”.
If you have:
You will need:
Overhead sewer
Standard 20 gal. (76 L) 39" (990 mm)
tall drain tub or utility sink, sump
pump and connectors (available from
local plumbing suppliers)
1" (25 mm) standpipe
2" (51 mm) diameter to 1" (25 mm)
diameter Standpipe Adapter
Part Number
3363920
Connector Kit Part Number 285835
Drain hose too short
Extension Drain Hose Part
Number 285863
Connector Kit Part Number 285835
Lint clogged drain
Drain Protector Part Number 367031
Connector Kit Part Number 285835
Floor drain system
Siphon Break Kit Part Number 285834
Connector Kit (x2) Part Number 285835
Extension Drain Hose Part
Number 285863
Alternate Inlet Hoses:
(may be required for some
installations, not supplied with washer)
n
8212656RP
10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
n
8212641RP
5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
n
8212546RP
4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
n
8212545RP
5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
(2 pack)
n
8212487RP
5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
n
8212638RP
6 ft. (1.8 m) Nylon braided inlet hose, space
saving 90° elbow, hypro-blue steel couplings
(2 pack)
n
8212637RP
6 ft. (1.8 m) Inlet hose, Black EPDM, space
saving 90° elbow, hypro-blue steel couplings
(2 pack)
Optional tools:
Parts supplied:
NOTE:
All parts supplied for installation are in the washer
basket.
4" min
(102 mm)
Wood block
Adjustable or open end
wrenches 1/2" (13 mm)
and 9/16" (14 mm)
Ruler or measuring tape
Level
Pliers that open to
1
9
16
" (39.5 mm)
Flashlight
Bucket
Cable tie
Drain hose with clamp
and form (may be shipped
unassembled)
Tools needed:
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather required tools and parts before starting installation.
Transport bolt hole
plugs (4)
Available Accessories:
An optional matching pedestal is available for your washer.
Please contact your retailer for ordering information, or see
the “Assistance or Service” page on the back of your “Use and
Care Guide”.
Parts needed:
(Not supplied with washer)
Water inlet hoses (2)
Flat inlet hose washers (4)