Whirlpool WFW94HEXL Owners Manual - Page 7

CYCLE GUIDE - SPECIAL-PURPOSE CYCLES Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the load being washed. Not all cycles and options are available on all models. For best performance, not all settings are available with each cycle, and some options cannot be used together. Items to wash using default cycle settings: Cycle: Wash Spin Soil Available Temperature*: Speed: Level: Options: Swimwear, items Rinse/Drain Warm* that need rinsing only & Spin Warm Cold Extra High N/A Extra Rinse High FanFresh Medium Delay Start Low No Spin Wet load of clothes Rinse/Drain N/A Extra High N/A FanFresh & Spin High Medium Low Sturdy garments and Allergen†† Sanitize† Extra High Heavy household items Hot High Normal exposed to possible Medium Light allergens Extra Rinse Deep Clean Presoak FanFresh Delay Start Jeans and denims Jeans Warm Medium Heavy (on some models) Cold Low Normal No Spin Light Extra Rinse Presoak FanFresh Delay Start No clothes in washer Clean Washer Cycle Cycle Details: This cycle adds water, then uses high-speed tumbling and an extra high-speed spin. For some fabrics, you may wish to set the spin speed to a lower setting. Use Drain & Spin to remove excess water from the load by choosing Rinse/Drain & Spin and turning off Extra Rinse. Spin speed can be set to a lower setting. Uses more water to flush out allergens such as exposed to dander from normally-soiled items Cycle combines low-speed tumbling and medium-speed spins to provide gentle care for jeans and denims. Use monthly with Affresh® to clean the interior of the washer. Make sure no clothes are in washer. The Clean Washer light will flash every 30 loads to remind you to run the Clean Washer cycle. * All temperature selections feature a Cold rinse, except Warm*, which features a warm wash and a warm rinse. † Sanitize Cycles certified by NSF International, an independent, third party testing and certification organization are those with the sanitize temperature selection available. The certification verified that these cycles reduce 99.9% of bacteria typically found on clothing, bedding, and towels. There is no carryover of bacteria between loads after the cycle is complete. Only cycles with sanitize wash temperature selected have been designed to meet the requirements of NSF Protocol P172 for Sanitizing Effectiveness. †† Allergen Allergen cycle certified by NSF International, an independent, third party testing and certification organization. The certification verified that this cycle reduced tested allergens by at least 95.0% and maintained the water temperature necessary to kill dust mites. Only the allergen cycle has been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance effectiveness. 7