Whirlpool WFW9750WW Owners Manual - Page 17

Delay Wash To begin the wash cycle later, select DELAY WASH until the desired delay time (in hours) shows in the Estimated Time Remaining display, and then select START. The countdown to the wash cycle will show in the display window, and the button indicator will blink until the cycle begins. IMPORTANT: When delaying a cycle, use only powdered detergents in the high efficiency "HE" detergent compartment  since liquid detergents may seep out of the compartment during Delay Wash, before the wash cycle begins. FanFresh™ option Use this option when you are not able to unload your clothes, soon after the wash cycle ends. This option provides periodic tumbling and airflow (aided by a quiet, ultra low energy fan) for up to 10 hours to help freshen your clothes. During this time, the "Done" indicator remains activated, the door remains locked, and the FanFresh™ indicator light will flash. The FanFresh™ option will automatically stop and the door lock will be released after this time expires, or if you press cancel at anytime to unload your laundry. Deep Clean with Steam Use this option for heavily soiled loads that need improved stain treatment, loads with multiple types of stains, or loads you  suspect as having stains, but are afraid may have been missed  (no sorting or searching for stains). When Deep Clean with Steam  is selected, the water temperature of the selected wash cycle is automatically set to warm. The water will then be slowly heated to the temperature selected, along with steam, to aid in stain removal. This option will provide optimal removal of organic stains such as blood and grass. Oxi Dispenser Use this option for optimum treatment using oxygen based stain fighter products and color-safe bleach. Add the products on the Oxi/ Color-safe section of the dispenser drawer. Selecting this option will ensure these products dispense during the wash cycle at the proper time. This option improves cleaning performance with cycles designed to clean cotton or synthetic fabrics. NightQuiet™ option In this option, the washer will sense vibration in the wash cycle and may adjust the spin speed to lower sound levels generated during the spin. Cycle Signal This signal is helpful when you are removing items from the  washer as soon as it stops. Press CYCLE SIGNAL to select Loud, Soft, or Off. To activate/deactivate button sound hold cycle signal button for 3 seconds. Modifiers Preset cycle settings of Water Temperature, Spin Speed, Soil  Level, and Rinse can be changed. You can change a modifier after starting a cycle anytime before the selected modifier begins. Not all modifiers are available with all cycles and options. Available options will glow amber. Current selections will glow green. If a modifier is unavailable with a selected cycle, the light will not illuminate. NOTE: The panel shown below may be different from that of your model. ■ To change the water temperature, select the WATER TEMP button until the desired setting glows green. ■ To change the spin speed, select the SPIN SPEED button  until the desired setting glows green. ■ To change cycle time, select SOIL LEVEL button until the desired setting glows green. ■ To change the rinse, select RINSE button until the desired setting glows green. Water Temp Select a water temperature based on the type of load you are washing. Use the warmest wash water safe for fabrics. Follow garment label instructions. In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult to remove. ■ This washer has a Sanitize water temperature that is certified  by NSF International, an independent third-party testing and certification organization. The certification verifies that the sanitizing cycle reduces 99.9% of bacteria typically found  on clothing, bedding, and towels, and there is no carryover  of bacteria between loads after the cycle is complete. Certified to Sanitize ■ The Sanitize temperature provides an extra high temperature  to remove 99.9% of certain bacteria. It is recommended that  you set your hot water heater to 120ºF (49ºC) to ensure proper performance during this cycle. ■ The Sanitize Water Temp uses high water temperatures.  Please check garment care label to avoid garment damage. ■ In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult  to remove. ■ Only cycles with sanitize wash temperature selected have been designed to meet the requirements of NSF Protocol P172 for Sanitizing Efficacy. 17