Whirlpool WGD49STB Owners Manual - Page 5
Control Panel & Features
View all Whirlpool WGD49STB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Control Panel & Features 1 2 3 4 2 3 4 Not all features and options are available on all models. Appearance may vary. 1 WRINKLE SHIELD™ Feature (on some models) When you are unable to remove a load of clothes from the dryer as soon as it stops, wrinkles can form. The WRINKLE SHIELD™ feature periodically tumbles, rearranges, and fluffs the load to help keep wrinkles from forming. n Get 90 minutes of heat-free, periodic tumbling at the end of a cycle. Turn the WRINKLE SHIELD™ knob to on or off at any time before the cycle has ended. 2 CYCLE KNOB Use your Cycle Knob to select available cycles on your dryer. Turn the knob to select a cycle for your laundry load. See "Cycle Guide" for detailed descriptions of cycles. TIMED DRY Will run the dryer for the specified time on the control. On models with a selectable temperature knob, you may choose a setting based on the fabrics in your load. Drying time and temperature will depend on your dryer model. FLUFF AIR No heat drying. ACCUDRY™/AUTOMATIC DRY Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level. Gives the best drying in the shortest time. Drying time will vary based on fabric type, load size, and dryness setting. Steam Refresh (steam models only) This cycle is best for reducing wrinkles and odors from dry items. Cycle time will increase depending on number of items. 3 TEMPERATURE Select a drying temperature based on the fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting. NOTE: The No Heat temperature setting (on some models) is not available on ACCUDRY™ cycles. 4 CYCLE SIGNAL/PUSH TO START The Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling. Turn the CYCLE SIGNAL knob to select the desired setting (On or Off). Press the PUSH to START knob to start the dryer. NOTE: When the Wrinkle Shield™ setting is selected and the Cycle Signal is on, the tone will sound every 5 minutes until the clothes are removed, or the Wrinkle Shield™ setting ends. 5