Whirlpool WGD49STB Owners Manual - Page 8
Select Cycle Signal, if desired
View all Whirlpool WGD49STB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Select the desired cycle 5. Set Wrinkle Shield, if desired (depending on model) Select the desired cycle for your load. See the Cycle Guide for more information about each cycle. ACCUDRY™/AUTOMATIC DRY Cycles You can select a different dryness level, depending on your load, by turning the knob to dryness level. Selecting More or Very Dry, ENERGY PREFERRED, or Less Dry automatically adjusts the dryness level at which the dryer will shut off. Once a dry level is set, it cannot be changed without stopping the cycle. ACCUDRY™/AUTOMATIC DRY cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting. Steam Refresh Reduces odors and wrinkles from small to medium-sized loads of dry items. Dry time will automatically adjust when the load size is sensed. Medium or High Temp Levels may be selected. 4. Set cycle settings, if desired Turn the TEMPERATURE knob to change the drying temperature setting. See "Setting the Drying Temperature". NOTE: Not all settings are available with all cycles. n Get 90 minutes of heat-free, periodic tumbling at the end of a cycle. Turn the WRINKLE SHIELD™ knob to select on or off at any time before the cycle has ended. n The Wrinkle Shield cycle on some models is automatically set to run for up to 40 minutes of no-heat, periodic tumbling at the end of the cycle. NOTE: Not all options and settings are available with all cycles. 6. Select Cycle Signal, if desired Turn the CYCLE SIGNAL knob to select the desired setting (On or Off). The Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling. NOTE: When the Wrinkle Shield™ setting is selected and the Cycle Signal is on, the tone will sound every 5 minutes until the clothes are removed, or the Wrinkle Shield™ setting ends. 7. Press PUSH to START to begin cycle Push and hold the PUSH to START knob to begin the cycle. Promptly remove items after cycle has completed to reduce wrinkling. Use the Wrinkle Shield™ feature to avoid wrinkling when you are unable to remove a load from the dryer as soon as it stops. 8