Whirlpool WOD97ES0ES Installation Guide - Page 7

Installation Instructions

Get Whirlpool WOD97ES0ES PDF manuals and user guides View all Whirlpool WOD97ES0ES manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

INSTALLATION INSTRUCTIONS Prepare Built-In Oven 1. Decide on the final location for the oven. Avoid drilling or cutting into house wiring during installation. 4. Partially close the door to engage the door latch locks. The door will stop at this point. WARNING Excessive Weight Hazard Use two or more people to move and install oven. Failure to do so can result in back or other injury. 2. To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting. 3. Remove the shipping materials and tape from the oven. Remember to keep the corner posts and other materials that may be needed for installation. 4. Remove the hardware package from inside the bag containing literature. 5. Remove and set aside racks and other parts from inside the oven. 6. Move oven and cardboard close to the oven's final location. Remove Oven Door(s) IMPORTANT: Use two hands to remove oven door. For double ovens, repeat the process for each door. 1. Prior to removing the oven door, prepare a surface where you will place it. This surface should be flat and covered with a soft blanket, or use the corner posts from your packaging material. 2. Open the oven door. 3. Locate the oven door hinge locks in both corners of the oven door, and then rotate the hinge locks toward the oven door to the unlocked position. If the door hinge lock is not rotated fully (see illustration B), the door will not remove properly. A B 5. Using two hands, grasp the edges of the oven door. Lift and pull the oven door toward you to remove. You may need to gently shift door from side to side as you pull. 6. Set the oven door(s) aside on the prepared covered work surface, with the oven door resting on its handle. 7. To continue with the oven installation, go to the "Positioning Oven Feet for Multiple Cabinet Cutout Heights" section. Replace Oven Door(s) 1. Using two hands, grasp side edges of door at the midpoint. Face the oven cavity. 2. Locate the slots on each side of the oven cavity for the door hinge locks. A. Oven door hinge lock in locked position B. Oven door hinge lock in unlocked position A A. Slot in the oven cavity for door hinge lock 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
7
INSTALLATION INSTRUCTIONS
Prepare Built-In Oven
1.
Decide on the final location for the oven. Avoid drilling
or cutting into house wiring during installation.
2.
To avoid floor damage, set the oven onto cardboard prior
to installation. Do not use handle or any portion of the front
frame for lifting.
3.
Remove the shipping materials and tape from the oven.
Remember to keep the corner posts and other materials that
may be needed for installation.
4.
Remove the hardware package from inside the bag
containing literature.
5.
Remove and set aside racks and other parts from inside
the oven.
6.
Move oven and cardboard close to the oven's final location.
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
Remove Oven Door(s)
IMPORTANT:
Use two hands to remove oven door. For double
ovens, repeat the process for each door.
1.
Prior to removing the oven door, prepare a surface where
you will place it. This surface should be flat and covered with
a soft blanket, or use the corner posts from your packaging
material.
2.
Open the oven door.
3.
Locate the oven door hinge locks in both corners of the oven
door, and then rotate the hinge locks toward the oven door
to the unlocked position. If the door hinge lock is not rotated
fully (see illustration B), the door will not remove properly.
A
B
A. Oven door hinge lock
in locked position
B. Oven door hinge lock
in unlocked position
4.
Partially close the door to engage the door latch locks.
The door will stop at this point.
5.
Using two hands, grasp the edges of the oven door. Lift and
pull the oven door toward you to remove. You may need
to gently shift door from side to side as you pull.
6.
Set the oven door(s) aside on the prepared covered work
surface, with the oven door resting on its handle.
7.
To continue with the oven installation, go to the “Positioning
Oven Feet for Multiple Cabinet Cutout Heights” section.
Replace Oven Door(s)
1.
Using two hands, grasp side edges of door at the midpoint.
Face the oven cavity.
2.
Locate the slots on each side of the oven cavity for the door
hinge locks.
A
A. Slot in the oven cavity for door hinge lock